Leading 10 typical forklift crashes ， forklift operation must pay attention to these matters ！.
Leading 10 typical forklift crashes ， forklift operation must pay attention to these matters ！.
Blog Article
Do not take too lightly the forklift at the office. If the procedure is bad, there will certainly be serious accidents in minutes, and there are numerous mishaps including forklifts.
Situation 1: The forklift freight obstructed the vehicle driver's view, and the individual ahead might not be discovered, leading to a moving mishap.
Situation 2: In order to preserve the balance of the forklift when raising hefty products, the employees utilized their body weight as the weight, which virtually created casualties.
Situation 3: The width of the forklift cargo exceeds the allowable size of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift procedure must focus on these matters ：.
Beginning.
1. Before beginning, observe the environments, and after confirming that there are no challenges that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge must be risk-free before starting.
3. When the forklift begins with a tons, the driver must first validate that the load is secure and reputable.
4. The beginning must be slow-moving and stable.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the mast must be slanted backwards. .
2. Do not raise the fork too expensive when driving. When getting in and leaving the task website or while driving, beware that there will be no obstacles overhead. When the load is taking a trip, the fork must not be increased too high, which will impact the stability of the forklift. .
3. After dumping, the fork needs to be lowered to the typical driving setting prior to driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal must be provided first. High-speed doglegs are prohibited. High-speed sharp turns will cause the vehicle to lose side security and tip over. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is forbidden to brake suddenly while driving with tons unless there are unique situations.
6. When the forklift is running, it should comply with the website traffic rules in the manufacturing facility and have to keep a particular safety range from the car in front. .
7. When the forklift is running, the lots must remain in the most affordable placement that does not hinder the driving, and the gantry needs to be effectively tilted back. The lots shall not be elevated other than when piling or packing. .
8. The height of the tons need to not obstruct the driver's sight. In unique conditions, when the item impacts the forward vision, drive at a reduced rate when reversing.
9. It is prohibited to activate the ramp, neither to drive across the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it needs to drive safely at a low speed when going into the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is prohibited for employees to depend on the fork to hold products and play a stabilizing role. .
12. If problems are discovered, they will certainly be repaired and reported in a timely fashion, and they will never ever run with illnesses or conceal them.
packing and discharging.
1. When fork-loading products, the distance in between both forks need to be changed as required to make the lots of both forks balanced and not skewed, and one side of the product must be against the rack. .
2. It is forbidden to deal with a single fork or make use of a fork top or draw. In unique scenarios, safety indication have to be established to remind bordering pedestrians. .
3. In the process of loading and dumping things, the forklift needs to be braked with the brake. .
4. The speed of the vehicle ought to be slow and stable. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and injure individuals. .
5. When utilizing a fork to fork the goods, the fork ought to be as deep as possible under the tons, and it must be noted that the fork pointer must not touch various other products or items. The lots should be stabilized with minimal back tilt of the gantry so that the tons does not slide in reverse. The mast can be tilted forward slightly when the tons is lowered to permit easy placement of the load and extraction of the forks. .
6. It is prohibited to fork products at broadband and ram difficult things with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Overloading is prohibited, and it is forbidden to use forks to lift personnel to engage in high-altitude operations to avoid high-altitude dropping crashes. .
9. It is not enabled to utilize the brake inertia to slip, put, round or roll objects. .
10. It is not allowed to use forks to select, transform pallet dump.
Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Before leaving the forklift, you should dump the goods or reduced the fork framework.
2. Pull the parking brake take care of to dead or dispirit the parking brake switch.
3. The engine is turned off and the power is removed. (Except for special scenarios, such as the chauffeur does not leave the lorry's line of vision and does not exceed 1 min).
4. Eliminate the secret. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look should be inspected, and gas, lubricating oil and cooling water need to be added.
2. Inspect the security efficiency of starting, running and braking.
3. Inspect whether the lights and horn signals are full and effective.
4. During the procedure of the forklift, examine whether the stress and temperature are regular.
5. After the forklift is running, the external leak ought to likewise be examined and the seals need to be replaced in time.
Forklift Safety Operation Specifications.
1. You should check before leaving the vehicle;.
2. When you experience a person before you during driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not surpass 5 km/h;.
4. When driving, the low point of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be also sharp to avoid the tendency of " cost-free switching";.
6. Running up and down the incline must be sluggish and uniform, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is above 10%, the car needs to be driven backwards when worsening;.
8. When the forklift workers lug the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" Stand-on Electric Pallet Stacker must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It Electric Forklift Truck for Warehouse is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of stopping force to exile round or easy-to-roll things.
7. It is not permitted to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Car parking is not allowed under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the road, the opposite side of the section with the same length as the challenge must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844